Kromschroder Basic Flame Safety Controls

Automatic burner control units IFS 110IM

Automatic burner control units for controlling and monitoring gas burners, for intermittent operation, ionization or UV control, single-electrode operation possible, multi-flame control possible, for earthed mains, FM and CSA approved. For grounded mains. Main gas after safety time, fault lock-out or restart following flame failure

trial for ignition period: 3, 5 or 10 s
flame failure response time for V2: 1 or 2 s
flame failure response time for V1: 1 or 2 s
mains voltage: 110/120 V AC

Download the Automatic burner control units IFS 110IM Brochure

Buy the Kromschroder automatic burner control unit IFS 110IM online at Combustion 911.

Automatic burner control units IFD 258

Automatic burner control unit IFD 258 ignites and monitors gas burners. As a result of its fully electronic design it reacts quickly to various process requirements and is therefore also suitable for frequent cycling operation.

trial for ignition period: 3, 5 or 10 s
flame failure response time: 2 s
mains voltage: 110 V AC, 115 V AC, 200 V AC or 230 V AC, for grounded or non grounded mains

Download the Automatic burner control units IFD 258 Brochure

Buy the Kromschroder automatic burner control unit IFD 258 online at Combustion 911.

Flame relay IFW 15T-N

Flame detector for multi-flame control in conjunction with IFS 110IM or for flame signalling, for intermittent operation, ionization or UV control, FM approved.

For grounded or non grounded mains
mains voltage: 110/120 V AC

Download the Flame relay IFW 15T-N Brochure

Buy the Kromschroder Flame Relay IFW 15 online at Combustion 911.